<![CDATA[Minitaps: New Products - M.6 Tap & .60UNM Tap ]]> https://minitaps.com Fri, 12 Jun 2026 17:13:32 +0000 <![CDATA[M.6 / 0.60 UNM Thread Tap, Bottoming 3 Flute, HSS #22214]]> https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-bottoming-3-flute-hss-22214/ Sun, 24 Feb 2019 17:31:22 +0000 https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-bottoming-3-flute-hss-22214/ M.60 (0.60 UNM) Thread Tap 3 Flute Bottoming Made of Hardened HSS (High Speed Steel) Made to ISO Standards Thread Pitch 0.15mm Threading Length Approximate 3.0mm Shank 0.060" Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. Overall length of tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
  • M.60 x.15mm ISO 2(3G) and 0.60 UNM Thread Tap
  • 3 Flute Bottoming
  • Price: $41.00

    ]]> M.60 (0.60 UNM) Thread Tap 3 Flute Bottoming Made of Hardened HSS (High Speed Steel) Made to ISO Standards Thread Pitch 0.15mm Threading Length Approximate 3.0mm Shank 0.060" Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. Overall length of tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
    • M.60 x.15mm ISO 2(3G) and 0.60 UNM Thread Tap
    • 3 Flute Bottoming
    • Price: $41.00

      ]]>
    • M.60 x.15mm ISO 2(3G) and 0.60 UNM Thread Tap
    • 3 Flute Bottoming
    • <![CDATA[M.6 (0.60 UNM) Thread Tap, Bottoming 3 Flute, HSS with TiN Coating #22215]]> https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-bottoming-3-flute-hss-with-tin-coating-22215/ Fri, 04 May 2018 09:54:59 +0000 https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-bottoming-3-flute-hss-with-tin-coating-22215/ M.60 (0.60 UNM) Thread Tap 3 Flute Bottoming Made of Hardened HSS (High Speed Steel) TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.15mm Threading Length Approximately 3.0mm Shank 0.060" Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
      • M.60 (0.60 UNM) Thread Tap
      • 3 Flute Bottoming

      • ]]> M.60 (0.60 UNM) Thread Tap 3 Flute Bottoming Made of Hardened HSS (High Speed Steel) TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.15mm Threading Length Approximately 3.0mm Shank 0.060" Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 22mm (.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
        • M.60 (0.60 UNM) Thread Tap
        • 3 Flute Bottoming

        • ]]>
        • M.60 (0.60 UNM) Thread Tap
        • 3 Flute Bottoming
        • https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-roll-form-plug-hss-with-tin-coating-2217/ M.6 (0.60 UNM) Thread Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch .15mm Threading Length Approximately 2.5mm /0.100” Shank 0.060" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 22mm (0.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
          • M.6 (0.60 UNM) Thread Tap
          • Roll Form Plug

          • ]]> M.6 (0.60 UNM) Thread Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch .15mm Threading Length Approximately 2.5mm /0.100” Shank 0.060" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 22mm (0.870") threaded length (tip to end of thread) 3.0mm (0.120"). Lengths can vary slightly between batches.
            • M.6 (0.60 UNM) Thread Tap
            • Roll Form Plug

            • ]]>
            • M.6 (0.60 UNM) Thread Tap
            • Roll Form Plug
            • https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60-unm-thread-tap-roll-form-plug-hss-22216/ M.6 (0.60 UNM) Thread Tap, Roll Form Plug, HSS, #22216
              • M.6 (0.60 UNM) Thread Tap
              • Roll Form Plug

              • ]]> M.6 (0.60 UNM) Thread Tap, Roll Form Plug, HSS, #22216
                • M.6 (0.60 UNM) Thread Tap
                • Roll Form Plug

                • ]]>
                • M.6 (0.60 UNM) Thread Tap
                • Roll Form Plug
                • https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/copy-of-tap-plug-3-flute-m-6-x-15mm-also-60unm-hss-w-tin/ M.60 (.60 UNM) Thread Tap 2 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.150mm Threading Length Approximate 2.50mm Shank 0.039" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated.
                  • M.60 (.60 UNM) Thread Tap
                  • 2 Flute Plug
                  • TiN (Titanium Nitride) Coating
                  • Made to DIN Standards
                    • ..

                    Price: $44.75

                    ]]> M.60 (.60 UNM) Thread Tap 2 Flute Plug TiN (Titanium Nitride) Coating Made to DIN Standards Thread Pitch 0.150mm Threading Length Approximate 2.50mm Shank 0.039" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated.
                    • M.60 (.60 UNM) Thread Tap
                    • 2 Flute Plug
                    • TiN (Titanium Nitride) Coating
                    • Made to DIN Standards
                      • ..

                      Price: $44.75

                      ]]>
                    • M.60 (.60 UNM) Thread Tap
                    • 2 Flute Plug
                    • TiN (Titanium Nitride) Coating
                    • Made to DIN Standards
                      • ..]]>                       <![CDATA[M6 (0.60 UNM) Thread Plug Tap, 2 Flute, HSS, #22212]]> https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m6-0-60-unm-thread-plug-tap-2-flute-hss-22212/ Fri, 10 Nov 2017 18:31:50 +0000 https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m6-0-60-unm-thread-plug-tap-2-flute-hss-22212/ M.6 (.60 UNM) Thread Tap 2 Flute Plug Made from High Speed Steel (HSS) Made to DIN Standards Thread Pitch 0.15mm Threading Length Approximate 2.50mm Shank 0.039" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes and CNC Mills. Overall length of tap is 22mm (0.870") threaded length (tip to end of thread) 4mm (0.16"). Lengths can vary slightly between batches.
                      • M.6 (.60 UNM) Thread Tap
                      • 2 Flute Plug
                      • Price: $41.00

                        ]]> M.6 (.60 UNM) Thread Tap 2 Flute Plug Made from High Speed Steel (HSS) Made to DIN Standards Thread Pitch 0.15mm Threading Length Approximate 2.50mm Shank 0.039" Made from Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes and CNC Mills. Overall length of tap is 22mm (0.870") threaded length (tip to end of thread) 4mm (0.16"). Lengths can vary slightly between batches.
                        • M.6 (.60 UNM) Thread Tap
                        • 2 Flute Plug
                        • Price: $41.00

                          ]]>
                        • M.6 (.60 UNM) Thread Tap
                        • 2 Flute Plug
                        • <![CDATA[Tap Plug 3 flute M.6 x.15mm also .60UNM HSS w/TiN #22211]]> https://minitaps.com/1-65-rimless-drill-bit/ Sat, 07 Jul 2012 17:33:30 +0000 https://minitaps.com/1-65-rimless-drill-bit/ #02211 M.60 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin, increases tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

                          #22211 is a M.60 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high-speed steel o..

                          Price: $44.75

                          ]]>                           #02211 M.60 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin, increases tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

                          #22211 is a M.60 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high-speed steel o..

                          Price: $44.75

                          ]]>                           #22211 is a M.60 Tap, aka: M.6 & .60UNM Tap design:  3 flute Plug w/TiN coating made to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high-speed steel o..]]>                           <![CDATA[M.6 / 0.60UNM Thread Plug Tap 3 Flute HSS #22210]]> https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60unm-thread-plug-tap-3-flute-hss-22210/ Tue, 22 Jun 2010 20:06:07 +0000 https://minitaps.com/taps-metric-m-right-hand/m-6-tap-60unm-tap/m-6-0-60unm-thread-plug-tap-3-flute-hss-22210/ M.6 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

                           M.6 Tap, aka: M.6 x .15mm ISO 2(3G) & .60UNM Tap design:  3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our t..

                          Price: $41.00

                          ]]>                           M.6 Tap, aka: M.6 & .60UNM Tap design: 3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 22mm (0.870") threaded length (tip to end of thread) 2.5mm (0.100") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

                           M.6 Tap, aka: M.6 x .15mm ISO 2(3G) & .60UNM Tap design:  3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our t..

                          Price: $41.00

                          ]]>                            M.6 Tap, aka: M.6 x .15mm ISO 2(3G) & .60UNM Tap design:  3 flute Plug to DIN standards thread pitch 0.150mm threading length approximate 2.50mm, Shank 0.039" made from hardened high speed steel our t..]]>