<![CDATA[Minitaps: New Products - M.9 Tap & .90UNM Tap]]> https://minitaps.com Sun, 14 Jun 2026 08:32:44 +0000 <![CDATA[ M.9 & 90UNM Plug Tap 2 flute w/TiN #22239]]> https://minitaps.com/taps-metric-m-right-hand/m-9-90unm-plug-tap-2-flute-w-tin-22239/ Fri, 20 Feb 2026 16:14:57 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-90unm-plug-tap-2-flute-w-tin-22239/ M.9 & 90UNM Plug Tap 2 flute w/TiN #22239

M.9 Tap, aka: .90UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our ..

Price: $40.30

]]> M.9 & 90UNM Plug Tap 2 flute w/TiN #22239

M.9 Tap, aka: .90UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our ..

Price: $40.30

]]> M.9 Tap, aka: .90UNM Tap design:  2 flute Plug with TiN coating made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our ..]]> <![CDATA[M.9 x.225mm Roll Form Plug Tap for Aluminum & Magnesium w/TiN #22137]]> https://minitaps.com/taps-metric-m-right-hand/m-9-x-225mm-roll-form-plug-tap-for-aluminum-magnesium-w-tin-22137/ Mon, 19 Mar 2018 17:35:16 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-x-225mm-roll-form-plug-tap-for-aluminum-magnesium-w-tin-22137/ M.9 Tap Roll Form Plug For Thread Forming in Aluminum and Magnesium TiN (Titanium Nitride) Coating Pitch .225mm Threading Length Approximate 4.0mm /0.160” Shank 0.060" Made From Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160"). Lengths can vary slightly between batches.
  • M.9 Tap Roll Form Plug
  • For Thread Forming in Aluminum and Magnesium

  • ]]> M.9 Tap Roll Form Plug For Thread Forming in Aluminum and Magnesium TiN (Titanium Nitride) Coating Pitch .225mm Threading Length Approximate 4.0mm /0.160” Shank 0.060" Made From Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills. The TiN (Titanium Nitride) coating is very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length of tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160"). Lengths can vary slightly between batches.
    • M.9 Tap Roll Form Plug
    • For Thread Forming in Aluminum and Magnesium

    • ]]>
    • M.9 Tap Roll Form Plug
    • For Thread Forming in Aluminum and Magnesium
    • https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-roll-form-plug-tap-for-aluminum-magnesium-22136/ M.9 Tap Roll Form Plug For Thread Forming in Aluminum or Magnesium Pitch .225mm Threading Length Approximate 4.0mm /0.160” Shank 0.060" Made From Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills.
      • M.9 Tap
      • Roll Form Plug For Thread Forming in Aluminum or Magnesium

      • ]]> M.9 Tap Roll Form Plug For Thread Forming in Aluminum or Magnesium Pitch .225mm Threading Length Approximate 4.0mm /0.160” Shank 0.060" Made From Hardened High Speed Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills.
        • M.9 Tap
        • Roll Form Plug For Thread Forming in Aluminum or Magnesium

        • ]]>
        • M.9 Tap
        • Roll Form Plug For Thread Forming in Aluminum or Magnesium
        • https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90-unm-thread-plug-tap-2-flute-hss-22238/ M.90 (0.90 UNM) Thread Tap 2 Flute Plug Made to DIN, M(S) ISO 2 (3G) Standards Thread Pitch 0.225mm Threading Length Approximately 5.0mm Shank 0.060" Made from Hardened HSS (High Speed Steel) Designed for production taping in automatic screw machines, tappers, CNC lathes and CNC mills. Overall length of tap is 25mm (.984") threaded length (tip to end of thread) 5.0mm (0.20"). Lengths can vary slightly between batches.
          • M.90 (0.90 UNM) Thread Tap
          • 2 Flute Plug

          • ]]> M.90 (0.90 UNM) Thread Tap 2 Flute Plug Made to DIN, M(S) ISO 2 (3G) Standards Thread Pitch 0.225mm Threading Length Approximately 5.0mm Shank 0.060" Made from Hardened HSS (High Speed Steel) Designed for production taping in automatic screw machines, tappers, CNC lathes and CNC mills. Overall length of tap is 25mm (.984") threaded length (tip to end of thread) 5.0mm (0.20"). Lengths can vary slightly between batches.
            • M.90 (0.90 UNM) Thread Tap
            • 2 Flute Plug

            • ]]>
            • M.90 (0.90 UNM) Thread Tap
            • 2 Flute Plug
            • https://minitaps.com/taps-metric-m-right-hand/m-9-x-225mm-0-90unm-tap-plug-roll-form-hss-w-tin-22237/ M.9 aka: .90UNM Tap Roll form Plug; w/TiN to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M.9 aka: .90UNM Tap Roll form Plug; w/TiN to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high-speed steel our taps are designed for production ta..

              Price: $46.75

              ]]>               M.9 aka: .90UNM Tap Roll form Plug; w/TiN to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M.9 aka: .90UNM Tap Roll form Plug; w/TiN to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high-speed steel our taps are designed for production ta..

              Price: $46.75

              ]]>               M.9 aka: .90UNM Tap Roll form Plug; w/TiN to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high-speed steel our taps are designed for production ta..]]> <![CDATA[M.9 / .90UNM Thread Plug Tap Roll Form HSS #22236]]> https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-90unm-thread-plug-tap-roll-form-hss-22236/ Mon, 28 Jun 2010 20:31:39 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-90unm-thread-plug-tap-roll-form-hss-22236/ M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

               

               M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm ..

              Price: $44.50

              ]]>               M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm threading length approximate 4.0mm /0.160”, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (0.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

               

               M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm ..

              Price: $44.50

              ]]>                

               M.9 aka: .90UNM Tap Roll form Plug; to DIN standards Size M.9 pitch .225mm ..]]> <![CDATA[M.9 / 0.90UNM Thread Bottoming Tap 3 Flute HSS w/TiN #22235]]> https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-bottoming-tap-3-flute-hss-w-tin-22235/ Mon, 28 Jun 2010 20:29:43 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-bottoming-tap-3-flute-hss-w-tin-22235/ M.90 Tap, aka: M.9 & .90UNM Tap design: 3 flute Bottoming made of HSS (High Speed Steel) with TiN coating, made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN..

              Price: $40.30

              ]]> M.90 Tap, aka: M.9 & .90UNM Tap design: 3 flute Bottoming made of HSS (High Speed Steel) with TiN coating, made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN..

              Price: $40.30

              ]]>               M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming  made of  HSS (High Speed Steel) with TiN coating,  made to DIN..]]>               <![CDATA[M.9 / 0.90UNM Thread Tap Bottoming HSS #22234]]> https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-tap-bottoming-hss-22234/ Sun, 27 Jun 2010 19:24:21 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-tap-bottoming-hss-22234/ M.90 Tap, aka: M.9 & .90UNM Tap design: 3 flute Bottoming, made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Please note this tap's Bottoming design has short lead, about three threads and it has a flat on its end. Price listed is for 1 to 9 pieces.

              M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for productio..

              Price: $36.00

              ]]>               M.90 Tap, aka: M.9 & .90UNM Tap design: 3 flute Bottoming, made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Please note this tap's Bottoming design has short lead, about three threads and it has a flat on its end. Price listed is for 1 to 9 pieces.

              M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for productio..

              Price: $36.00

              ]]>               M.90 Tap, aka: M.9 & .90UNM Tap design:  3 flute Bottoming,  made to DIN standards thread pitch 0.225mm threading length approximate 4.0mm, Shank 0.060" made from "HSS" hardened high speed steel our taps are designed for productio..]]>               <![CDATA[M.9 (0. 90UNM) Thread Plug Tap, Spiral 2 Flute, HSS with TiN Coating, #22233]]> https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-plug-tap-spiral-2-flute-hss-with-tin-coating-22233/ Sun, 27 Jun 2010 19:05:17 +0000 https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90unm-thread-plug-tap-spiral-2-flute-hss-with-tin-coating-22233/ M.9 (0.90 UNM) Thread Tap Spiral 2 Flute Plug Thread Pitch .225mm Length of Cut Approx. 4mm TiN (Titanium Nitride) Coating Made to DIN Standards Shank 0.060" Made from Hardened HSS (High Speed Steel)
              • M.9 (0.90 UNM) Thread Tap
              • Spiral 2 Flute Plug

              • ]]> M.9 (0.90 UNM) Thread Tap Spiral 2 Flute Plug Thread Pitch .225mm Length of Cut Approx. 4mm TiN (Titanium Nitride) Coating Made to DIN Standards Shank 0.060" Made from Hardened HSS (High Speed Steel)
                • M.9 (0.90 UNM) Thread Tap
                • Spiral 2 Flute Plug

                • ]]>
                • M.9 (0.90 UNM) Thread Tap
                • Spiral 2 Flute Plug
                • https://minitaps.com/taps-metric-m-right-hand/m-9-tap-90unm-tap/m-9-0-90-unm-thread-plug-tap-2-spiral-flute-hss-22232/ M.9 (0.90UNM) Thread Tap Spiral 2 Flute Plug Thread Pitch .225mm Length of Cut Approx. 4mm / .160" Made to DIN Standards Shank 0.060" Made from Hardened HSS (High Speed Steel) Designed for pulling the chips away from the cutting edge while tapping blind or through holes. Suitable for production tapping of softer materials such as brass, copper, aluminum, plastic or similar. This is a production tap for tapping in automatic screw machines, tappers, CNC lathes and CNC mills.
                  • M.9 (0.90UNM) Thread Tap
                  • Spiral 2 Flute Plug
                  • Thread Pitch .225mm
                  • Length of Cut Approx. 4mm / .160"Price: $26.00

                    ]]> M.9 (0.90UNM) Thread Tap Spiral 2 Flute Plug Thread Pitch .225mm Length of Cut Approx. 4mm / .160" Made to DIN Standards Shank 0.060" Made from Hardened HSS (High Speed Steel) Designed for pulling the chips away from the cutting edge while tapping blind or through holes. Suitable for production tapping of softer materials such as brass, copper, aluminum, plastic or similar. This is a production tap for tapping in automatic screw machines, tappers, CNC lathes and CNC mills.
                    • M.9 (0.90UNM) Thread Tap
                    • Spiral 2 Flute Plug
                    • Thread Pitch .225mm
                    • Length of Cut Approx. 4mm / .160"Price: $26.00

                      ]]>
                    • M.9 (0.90UNM) Thread Tap
                    • Spiral 2 Flute Plug
                    • Thread Pitch .225mm
                    • Length of Cut Approx. 4mm / .160"