<![CDATA[Minitaps: New Products - M1.2 Tap & 1.20UNM Tap]]> https://minitaps.com Fri, 12 Jun 2026 00:07:46 +0000 <![CDATA[M1.2 Thread Pre-plating Plug Tap 3 Flute HSS #22252]]> https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-thread-pre-plating-plug-tap-3-flute-hss-22252/ Mon, 23 Oct 2023 16:12:24 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-thread-pre-plating-plug-tap-3-flute-hss-22252/ M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

M1.2 x.25mm Tap design:  3 flute Plug, class of fit is ISO3 (6G) used for Pre-Plating tapping thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from harden..

Price: $34.00

]]> M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

M1.2 x.25mm Tap design:  3 flute Plug, class of fit is ISO3 (6G) used for Pre-Plating tapping thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from harden..

Price: $34.00

]]> M1.2 x.25mm Tap design:  3 flute Plug, class of fit is ISO3 (6G) used for Pre-Plating tapping thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from harden..]]> <![CDATA[M1.2 x.30mm Plug Tap w/TiN Coating #22151]]> https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-x-30mm-plug-tap-w-tin-coating-22151/ Mon, 19 Mar 2018 16:32:28 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-x-30mm-plug-tap-w-tin-coating-22151/ M1.2 x .30mm Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.30mm (Non-Standard) Threading Length Approximate 4.0mm Shank 0.060" Made From Hardened Tool Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills.
  • M1.2 x .30mm Tap
  • 3 Flute Plug

  • ]]> M1.2 x .30mm Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.30mm (Non-Standard) Threading Length Approximate 4.0mm Shank 0.060" Made From Hardened Tool Steel Designed for Production Tapping in Automatic Screw Machines, Tappers, CNC Lathes, and CNC Mills.
    • M1.2 x .30mm Tap
    • 3 Flute Plug

    • ]]>
    • M1.2 x .30mm Tap
    • 3 Flute Plug
    • https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-thread-x-20-pitch-plug-tap-3-flute-hss-with-tin-22259/ M1.2 Tap, .20mm pitch: 3 flute Plug made to ISO standards thread class is ISO 2 (5H) thread pitch 0.20mm made of (HSS) High Speed Steel coated with TiN, threading length approximate 4.0mm, Shank 0.060" our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 4.00mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces discounting starts at 10 pieces.
      • M1.2 Thread x .20mm Pitch Tap
      • 3 Flute Plug

      • ]]> M1.2 Tap, .20mm pitch: 3 flute Plug made to ISO standards thread class is ISO 2 (5H) thread pitch 0.20mm made of (HSS) High Speed Steel coated with TiN, threading length approximate 4.0mm, Shank 0.060" our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 4.00mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces discounting starts at 10 pieces.
        • M1.2 Thread x .20mm Pitch Tap
        • 3 Flute Plug

        • ]]>
        • M1.2 Thread x .20mm Pitch Tap
        • 3 Flute Plug
        • https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-thread-x-20mm-special-pitch-plug-tap-hss-2258/ M1.2 Tap, .20mm pitch: 3 flute Plug made to ISO standards thread class is ISO 2 (5H) thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. Please note this tap has a non standard pitch of .20mm therefore it is not to 1.20UNM standards. Stock is limited and lead time for this item is under one month.
          • M1.2 Tap
          • Thread Pitch .20mm (NON-STANDARD) Standard thread..

            Price: $34.75

            ]]> M1.2 Tap, .20mm pitch: 3 flute Plug made to ISO standards thread class is ISO 2 (5H) thread pitch 0.20mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces. Please note this tap has a non standard pitch of .20mm therefore it is not to 1.20UNM standards. Stock is limited and lead time for this item is under one month.
            • M1.2 Tap
            • Thread Pitch .20mm (NON-STANDARD) Standard thread..

              Price: $34.75

              ]]>
            • M1.2 Tap
            • Thread Pitch .20mm (NON-STANDARD) Standard thread..]]> <![CDATA[M1.2 x. 25mm & 1.20UNM Tap Bottoming 3 flute HSS w/TiN #22255]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/copy-of-tap-bottoming-m1-4-x-30mm-also-1-40unm-hss-w-tin/ Fri, 06 Jan 2017 18:28:38 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/copy-of-tap-bottoming-m1-4-x-30mm-also-1-40unm-hss-w-tin/ #02255 M1.2 x. 25mm pitch Tap, aka: 1.20UNM Tap design: 3 flute Bottoming style with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 5.0mm / 0.200” , Shank 1.50mm / 0.059" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm / 1.000" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              #22255 M1.2  x. 25mm pitch Tap, aka: 1.20UNM Tap design:  3 flute Bottoming style with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 5.0mm / 0.2..

              Price: $34.00

              ]]>               #02255 M1.2 x. 25mm pitch Tap, aka: 1.20UNM Tap design: 3 flute Bottoming style with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 5.0mm / 0.200” , Shank 1.50mm / 0.059" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm / 1.000" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              #22255 M1.2  x. 25mm pitch Tap, aka: 1.20UNM Tap design:  3 flute Bottoming style with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 5.0mm / 0.2..

              Price: $34.00

              ]]>               #22255 M1.2  x. 25mm pitch Tap, aka: 1.20UNM Tap design:  3 flute Bottoming style with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 5.0mm / 0.2..]]>               <![CDATA[M1.2 / 1.2UNM Tap Plug Roll Form HSS w/TiN #22257]]> https://minitaps.com/taps-miniature/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-2-1-2unm-roll-form-plug-tap-hss/ Fri, 15 Jan 2016 16:50:07 +0000 https://minitaps.com/taps-miniature/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-2-1-2unm-roll-form-plug-tap-hss/ M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel with TiN coating. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass, stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative and is not exact item.

              M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel with TiN coating. Our Roll form taps are designed ..

              Price: $35.00

              ]]>               M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel with TiN coating. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass, stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Image is representative and is not exact item.

              M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel with TiN coating. Our Roll form taps are designed ..

              Price: $35.00

              ]]>               M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel with TiN coating. Our Roll form taps are designed ..]]>               <![CDATA[M1.2 / 1.2UNM Tap Plug Roll Form HSS #22256]]> https://minitaps.com/taps-miniature/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-4-1-4unm-roll-form-plug-tap-hss/ Tue, 29 Dec 2015 11:37:16 +0000 https://minitaps.com/taps-miniature/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-4-1-4unm-roll-form-plug-tap-hss/ M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.50mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

              M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..

              Price: $34.75

              ]]>               M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.50mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

              M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..

              Price: $34.75

              ]]>               M1.2 Tap Roll form Plug also call thread forming Tap; Thread pitch .25mm, to DIN standards Shank 1.5mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..]]>               <![CDATA[M1.2 & 1.20 UNM Tap Bottoming 3 Flute HSS #22254]]> https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-1-20-unm-tap-bottoming-3-flute-hss-22254/ Thu, 22 Mar 2012 10:16:28 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-1-20-unm-tap-bottoming-3-flute-hss-22254/ M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Bottoming style made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              Typically, we ship this item within one to two days lead time can be two weeks, contact us for details.

              ]]>               M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Bottoming style made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              Typically, we ship this item within one to two days lead time can be two weeks, contact us for details.

              ]]>               Typically, we ship this item within one to two days lead time can be two weeks, contact us for details.

              https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-1-20unm-thread-plug-tap-3-flute-hss-w-tin-22251/ M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 4.00mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M1.2 Tap, aka: 1.20UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high-speed steel our taps are designed..

              Price: $34.00

              ]]> M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 25mm (0.984") threaded length (tip to end of thread) 4.00mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M1.2 Tap, aka: 1.20UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high-speed steel our taps are designed..

              Price: $34.00

              ]]>               M1.2 Tap, aka: 1.20UNM Tap design:  3 flute Plug with TiN coating made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high-speed steel our taps are designed..]]>               <![CDATA[M1.2 / 1.20 UNM Thread Plug Tap 3 Flute HSS #22250]]> https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-1-20-unm-thread-plug-tap-3-flute-hss-22250/ Thu, 17 Jun 2010 13:15:42 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-2-tap-1-20unm-tap/m1-2-1-20-unm-thread-plug-tap-3-flute-hss-22250/ M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M1.2 Tap, aka:  1.20UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened hig..

              Price: $34.00

              ]]>               M1.2 Tap, aka: 1.20UNM Tap design: 3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 25mm (.984") threaded length (tip to end of thread) 4.0mm (0.160") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

              M1.2 Tap, aka:  1.20UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened hig..

              Price: $34.00

              ]]>               M1.2 Tap, aka:  1.20UNM Tap design:  3 flute Plug made to DIN standards thread pitch 0.25mm threading length approximate 4.0mm, Shank 0.060" made from hardened hig..]]>