<![CDATA[Minitaps: New Products - M1.4 Tap & 1.40 UNM Tap]]> https://minitaps.com Thu, 11 Jun 2026 12:47:14 +0000 <![CDATA[M1.4 x.20 non-std Thread Plug Tap 3 Flute HSS #22268]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-x-20-non-std-thread-plug-tap-3-flute-hss-22268/ Wed, 22 Feb 2023 17:56:46 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-x-20-non-std-thread-plug-tap-3-flute-hss-22268/ M1.4 x.20 non-std Thread Plug Tap 3 Flute HSS #22268

 

M1.4 x.20mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.20mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..

Price: $42.00

]]> M1.4 x.20 non-std Thread Plug Tap 3 Flute HSS #22268

 

M1.4 x.20mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.20mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..

Price: $42.00

]]>  

M1.4 x.20mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.20mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..]]> <![CDATA[M1.4 x.35 non-std Thread Plug Tap 3 Flute HSS #22269]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-x-35-non-std-thread-plug-tap-3-flute-hss-22269/ Sat, 28 Jan 2023 14:53:52 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-x-35-non-std-thread-plug-tap-3-flute-hss-22269/ M1.4 x.35 non-std Thread Plug Tap 3 Flute HSS #22269

 

M1.4 x.35mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.35mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..

Price: $42.00

]]> M1.4 x.35 non-std Thread Plug Tap 3 Flute HSS #22269

 

M1.4 x.35mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.35mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..

Price: $42.00

]]>  

M1.4 x.35mm Tap design:  3 flute Plug style made to ISO 2 (6H) thread pitch 0.35mm Non standard Pitch threading length approximate 5.0mm / 0.200&rd..]]> <![CDATA[M1.4 x.30mm / 1.40UNM Tap Plug Roll Form HSS w/ TiN #22267]]> https://minitaps.com/taps-for-metric-american-thread/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-7-roll-form-plug-tap-w-tin/ Wed, 25 Nov 2015 15:43:39 +0000 https://minitaps.com/taps-for-metric-american-thread/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-7-roll-form-plug-tap-w-tin/ M1.4 / 1.40UNM Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN which can increase toll life and overall performance three full. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

M1.4 / 1.40 UNM Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN  which can increase toll life and overall performance three fu..

Price: $37.00

]]> M1.4 / 1.40UNM Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN which can increase toll life and overall performance three full. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

M1.4 / 1.40 UNM Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN  which can increase toll life and overall performance three fu..

Price: $37.00

]]> M1.4 / 1.40 UNM Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. This tap has been coated with TiN  which can increase toll life and overall performance three fu..]]> <![CDATA[M1.4 x.30 / 1.40UNM Tap Plug Roll Form HSS #2266]]> https://minitaps.com/taps-for-metric-american-thread/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-7-roll-form-plug-tap/ Wed, 25 Nov 2015 15:38:08 +0000 https://minitaps.com/taps-for-metric-american-thread/taps-metric-miniature-m-3-to-m1-40/copy-of-m1-7-roll-form-plug-tap/ M1.4 Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

M1.4 Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..

Price: $34.00

]]> M1.4 Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plug produces no burrs or chips in production taping. Often well suited for materials like aluminum, copper, brass stainless steel in the 300 series in part production on automatic screw machines, CNC mills and lathes.

M1.4 Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..

Price: $34.00

]]> M1.4 Tap Roll form Plug also call thread forming Tap; Thread pitch .30mm, to ISO standards Shank 2.0mm made from hardened high speed steel. Our Roll form taps are designed create the thread by forming the material rather than cutting, the roll form plu..]]> <![CDATA[M1.4 x. 30mm / 1.40UNM Tap Bottoming 3 Flute HSS w/TiN #22265]]> https://minitaps.com/1-70-rimless-drill-bit/ Sat, 07 Jul 2012 17:57:24 +0000 https://minitaps.com/1-70-rimless-drill-bit/ #2265 M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Bottoming style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

#2265  M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Bottoming style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Aut..

Price: $34.00

]]> #2265 M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Bottoming style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

#2265  M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Bottoming style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Aut..

Price: $34.00

]]> #2265  M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Bottoming style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Aut..]]> <![CDATA[M1.4 / 1.40UNM Thread Bottoming 3 Flute Tap HSS #22264]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40unm-thread-bottoming-3-flute-tap-hss-22264/ Sun, 27 Jun 2010 19:17:32 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40unm-thread-bottoming-3-flute-tap-hss-22264/ M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Bottoming style made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 5.0mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

 M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Bottoming style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high sp..

Price: $29.00

]]> M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Bottoming style made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 5.0mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

 M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Bottoming style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high sp..

Price: $29.00

]]>  M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Bottoming style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high sp..]]> <![CDATA[M1.4 / 1.40UNM Plug Tap 3 Flute HSS w/TiN #22261]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40unm-plug-tap-3-flute-hss-w-tin-22261/ Thu, 17 Jun 2010 13:19:55 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40unm-plug-tap-3-flute-hss-w-tin-22261/ M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Plug style with TiN coating made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Plug style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high spe..

Price: $34.00

]]> M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Plug style with TiN coating made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. The coating used TiN (Titanium Nitride) very thin and smooth, increases tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 5.00mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Plug style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high spe..

Price: $34.00

]]> M1.4 Tap, aka: 1.40UNM Tap design:  3 flute Plug style with TiN coating made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200” , Shank 2.0mm / 0.078" made from hardened high spe..]]> <![CDATA[M1.4 / 1.40 UNM Thread Plug Tap 3 Flute HSS #22260]]> https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40-unm-thread-plug-tap-3-flute-hss-22260/ Thu, 17 Jun 2010 13:17:39 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-4-tap-1-40-unm-tap/m1-4-1-40-unm-thread-plug-tap-3-flute-hss-22260/ M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Plug style made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 5.0mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

 

M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Plug style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0m..

Price: $29.00

]]> M1.4 Tap, aka: 1.40UNM Tap design: 3 flute Plug style made to DIN standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 5.0mm (0.200") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.

 

M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Plug style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0m..

Price: $29.00

]]>  

M1.4 Tap, aka:  1.40UNM Tap design:  3 flute Plug style made to ISO standards thread pitch 0.30mm threading length approximate 5.0mm / 0.200”, Shank 2.0m..]]>