<![CDATA[Minitaps: New Products - M1.6 Tap ]]> https://minitaps.com Thu, 11 Jun 2026 03:13:30 +0000 <![CDATA[M1.6 Thread x .35mm Pitch Plug Tap, Roll Form, HSS with TiN #22277]]> https://minitaps.com/taps-metric-m-right-hand/m1-6-thread-x-35mm-pitch-plug-tap-roll-form-hss-with-tin-22277/ Fri, 14 Jun 2013 11:23:45 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-6-thread-x-35mm-pitch-plug-tap-roll-form-hss-with-tin-22277/ M1.6 Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated.
  • M1.6 Tap
  • Roll Form Plug
  • TiN (Titanium Nitride) Coating
  • Made to ISO Standards
  • Price: $37.00

    ]]> M1.6 Tap Roll Form Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop coated taps typically tapped three times the number of holes compared to uncoated.
    • M1.6 Tap
    • Roll Form Plug
    • TiN (Titanium Nitride) Coating
    • Made to ISO Standards
    • Price: $37.00

      ]]>
    • M1.6 Tap
    • Roll Form Plug
    • TiN (Titanium Nitride) Coating
    • Made to ISO Standards
    • <![CDATA[M1.6 Thread x .35mm Pitch Bottoming Tap, 3 Flute, HSS with TiN Coating, #22275]]> https://minitaps.com/taps-metric-m-right-hand/m1-6-thread-x-35mm-pitch-bottoming-tap-3-flute-hss-with-tin-coating-22275/ Fri, 14 Jun 2013 10:47:31 +0000 https://minitaps.com/taps-metric-m-right-hand/m1-6-thread-x-35mm-pitch-bottoming-tap-3-flute-hss-with-tin-coating-22275/ M1.6 Tap 3 Flute Bottoming Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel TiN (Titanium Nitride) Coating Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
      • M1.6 Tap
      • 3 Flute Bottoming
      • Made to ISO Standards
      • Thread Pitch 0.35mm

      • ]]> M1.6 Tap 3 Flute Bottoming Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel TiN (Titanium Nitride) Coating Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
        • M1.6 Tap
        • 3 Flute Bottoming
        • Made to ISO Standards
        • Thread Pitch 0.35mm

        • ]]>
        • M1.6 Tap
        • 3 Flute Bottoming
        • Made to ISO Standards
        • Thread Pitch 0.35mm
        • https://minitaps.com/taps-metric-m-right-hand/m1-6-tap/m1-6-thread-x-35mm-pitch-plug-tap-roll-form-hss-22276/ M1.6 Tap Roll Form Plug Made to DIN standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm (1.300") threaded length (tip to end of thread) 6.mm (0.240"). Lengths can vary slightly between batches.
          • M1.6 Tap
          • Roll Form Plug

          • ]]> M1.6 Tap Roll Form Plug Made to DIN standards Thread Pitch .35mm Threading Length Approximately 6.0mm / 0.240” Shank 2mm /0.78" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm (1.300") threaded length (tip to end of thread) 6.mm (0.240"). Lengths can vary slightly between batches.
            • M1.6 Tap
            • Roll Form Plug

            • ]]>
            • M1.6 Tap
            • Roll Form Plug
            • https://minitaps.com/products/M1.6-Bottoming-Tap-.html M1.6 Tap 3 Flute Plug Bottoming Made to DIN Standards Thread Pitch 0.35mm Threading Length Approximate 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
              •  M1.6 Tap
              • 3 Flute Plug Bottoming

              • ]]> M1.6 Tap 3 Flute Plug Bottoming Made to DIN Standards Thread Pitch 0.35mm Threading Length Approximate 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
                •  M1.6 Tap
                • 3 Flute Plug Bottoming

                • ]]>
                •  M1.6 Tap
                • 3 Flute Plug Bottoming
                • https://minitaps.com/products/M1.6-Spiral-Flute-Plug-Tap.html M1.6 x.20mm Class of Fit ISO 3 (6G) Plug 3 Flute Made to ISO Standards Thread Pitch 0.20mm (SPECIAL, Non-Standard Pitch) Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 30mm /1.18" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
                  • M1.6 x.20mm
                  • Class of Fit ISO 2(4G, 5H)
                  • Plug 3 Flute

                  • ]]> M1.6 x.20mm Class of Fit ISO 3 (6G) Plug 3 Flute Made to ISO Standards Thread Pitch 0.20mm (SPECIAL, Non-Standard Pitch) Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production tapping in automatic screw machines, tappers, CNC lathes, and CNC mills. Overall length of tap is 30mm /1.18" threaded length (tip to end of thread) 6.0mm (0.240"). Lengths can vary slightly between batches.
                    • M1.6 x.20mm
                    • Class of Fit ISO 2(4G, 5H)
                    • Plug 3 Flute

                    • ]]>
                    • M1.6 x.20mm
                    • Class of Fit ISO 2(4G, 5H)
                    • Plug 3 Flute
                    • https://minitaps.com/taps-metric-m-right-hand/m1-6-tap/m1-6-thread-x-35mm-pitch-plug-tap-3-flute-hss-with-tin-coating-22271/ M1.6 Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production taping in automatic screw machines, tappers, CNC lathes, and CNC mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 6.00mm (0.240"). Lengths can vary slightly between batches.
                      • Very Limited Stock
                      • M1.6 Tap

                      • ]]> M1.6 Tap 3 Flute Plug TiN (Titanium Nitride) Coating Made to ISO Standards Thread Pitch 0.35mm Threading Length Approximately 6.0mm / 0.240” Shank 2.0mm / 0.078" Made from Hardened High Speed Steel Designed for production taping in automatic screw machines, tappers, CNC lathes, and CNC mills. The TiN (Titanium Nitride) coating is very thin and smooth, increasing tap performance and tool life. In our shop TiN coated taps typically tapped three times the number of holes. Overall length is 33mm / 1.300" threaded length (tip to end of thread) 6.00mm (0.240"). Lengths can vary slightly between batches.
                        • Very Limited Stock
                        • M1.6 Tap

                        • ]]>
                        • Very Limited Stock
                        • M1.6 Tap
                        • https://minitaps.com/taps-metric-m-right-hand/m1-6-tap/m1-6-thread-x-35mm-pitch-plug-tap-3-flute-hss-22270/ M1.6 Tap, Tap design: 3 flute Plug style made to ISO standards thread pitch 0.35mm threading length approximate 6.0mm / 0.240”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
                          • M1.6 Tap
                          • 3 Flute Plug
                            • Price: $29.00

                            ]]> M1.6 Tap, Tap design: 3 flute Plug style made to ISO standards thread pitch 0.35mm threading length approximate 6.0mm / 0.240”, Shank 2.0mm / 0.078" made from hardened high speed steel our taps are designed for production taping in Automatic screw machines, Tappers, CNC lathes and CNC mills. Image is representative of the item for sales. Overall length of Tap is 32mm /1.30" threaded length (tip to end of thread) 6.0mm (0.240") lengths can vary slightly between batches. Price listed is for 1 to 9 pieces.
                            • M1.6 Tap
                            • 3 Flute Plug
                              • Price: $29.00

                              ]]>
                            • M1.6 Tap
                            • 3 Flute Plug